Yanmar 6LYA-STP Especificações Página 42

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 41
_
40
_
Remove the threaded area and the connecting pivot of the remote control cable from the
governor lever. Adjust the cable stroke by adjusting the fastening distance of the threaded
area.
Loosen the setting bolt of the remote control cable clamp bracket and adjust the fixing position
of the remote control cable.
(However, the adjustment of the remote control cable stroke must be made as in above.)
(4) Adjusting the Marine Gear Remote Control Cable
Check to see that the clutch lever on the
marine gear side is in the neutral position
when the remote control handle is in
NEUTRAL.
If the position of the clutch lever is incorrect,
Ioosen the setting screw of the cable bracket
and adjust the position of the cable.
Check the clutch lever in
FWD (Forward) (Ahead )
REV (Reverse) (Astern)
making sure it is correctly aligned.
Make any necessary adjustments using
NEUTRAL as the central point.
Make sure the control cable is securely fas-
tened to the clutch lever.
For other models, refer to the marine gear
operation manual.
(5) Cleaning the Turbocharger Blower
Contamination of the turbocharger blower caus-
es blower speed to drop and engine output to
down.
Prepare blower cleaning agent, fresh water
and a small pitcher.
Remove the pre-cleaner (filter) of the tur-
bocharger air inlet.
Pour about 50cc of blower cleaning agent little
by little at about 10 second intervals through
the air inlet under no load operation (2500-
~3000 rpm)
Wait about 3 minutes, and pour 50cc fresh
water into the air inlet in the same manner at
about 10 second intervals.
Cable bracket
Clutch lever
Setting screw
Ahead
NEutral
Astern
Lube oil
filter
Fresh water tank
Turbo charger
[Fig.23]
[Fig.24]
Adjusting the marine gear remote
control cable (KMH6A, KMH6A1)
Vista de página 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 54 55

Comentários a estes Manuais

Sem comentários