
ZT370 Operation Manual 49
ZT370 Operation Manual
TROUBLESHOOTING
No. Problem Possible cause Action
Reference
page
1 Remote control operates
hard, binds, has excessive
free play or makes unusual
sounds
Insufficient lubrication on
the shift and throttle (if
applied) linkage fasteners.
Lubricate.
39
Obstruction in the shift or
throttle (if applied) linkages.
Remove the obstruction.
39
Loose or missing shift and
throttle linkages.
Check all throttle linkages. If
any are loose or missing,
consult your authorized
Yanmar Marine dealer or
distributor immediately.
–
Shift or throttle (if
equipped) cable is kinked.
Straighten the cable or have
your authorized Yanmar
Marine dealer or distributor
replace the cable if damaged
beyond repair.
39
2 Steering wheel turns hard or
jerky
Low power steering pump
fluid level.
Check for leaks. Refill the
system with fluid.
–
Stern-drive belt is loose or
in poor condition.
Replace and/or adjust.
–
Insufficient lubrication on
the steering components.
Lubricate.
–
Insufficient lubrication on
the transom gimbal
housing assembly and
swivel shaft.
Lubricate.
38
Loose or missing steering
fasteners or parts.
Check all parts and
fasteners. If any are loose or
missing, consult your
authorized Yanmar Marine
dealer or distributor
immediately.
38
Contaminated power
steering fluid.
Consult your authorized
Yanmar Marine dealer or
distributor.
–
ZT370_OM.book 49 ページ 2013年9月27日 金曜日 午前10時16分
Necesito manual de reparación completo por favor.