Yanmar BY series Especificações descarregar pdf (Página 36)

ENGINE OIL

Engine (Lube) Oil Specifications

Use an engine oil that meets or exceeds the

following guidelines and classifications:

API Service Categories CD or higher

Recommended SAE Oil Viscosity: 10W30

or 15W40

Note:

1. Be sure the engine oil, engine oil

storage containers and engine oil filling

equipment are free of sediment or

water.

2. Change the engine oil after the first 50

hours of operation and then at every

125 hours thereafter.

3. Select the oil viscosity based on the

ambient temperature where the engine

is being operated. See the SAE Service

Grade Viscosity Chart (Figure 5).

4. Yanmar does not recommend the use

of engine oil “additives.”

Handling Engine Oil

1. When handling and storing engine oil,

be careful not to allow dust and water to

contaminate the oil. Clean around the

filler port before filling.

2. Do not mix lube oils of different types or

brands. Mixing may cause the chemical

characteristics of the oil to change and

lubricating performance to decrease,

reducing the engine's life.

3. Engine oil should be changed at the

specified intervals, regardless if the

engine has been operated.

Engine Oil Viscosity

-4°F 14°F 32°F 50°F 68°F 86°F 104°F

(-20°C) (-10°C) (0°C) (10°C) (20°C) (30°C) (40°C)

SAE 10W-30

SAE 15W-40

0000005

Figure 5

If you operate your equipment at

temperatures outside the limits shown,

consult your authorized Yanmar dealer or

distributor for special lubricants or starting

aids.

BEFORE YOU OPERATE

30 6LPA Series Operation Manual

© 2007 Yanmar Marine International

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 103 104

Comentários a estes Manuais

Sem comentários