
Symptom Probable Cause Measure Reference
Starting Failures:
• Starter turns but
engine does not start
No fuel. Add fuel. Bleed fuel
system.
See Filling the
Fuel Tank on
page 29 and See
Bleeding the
Fuel System on
page 29
Air in fuel line. Bleed fuel system. See Bleeding the
Fuel System on
page 29
Fuel filter is clogged. Replace filter element. See Replacing
the Fuel Filter
Element on page
60
Improper fuel. Replace with
recommended fuel.
See Diesel Fuel
Specifications on
page 27
Problem with fuel injection. See your authorized
Yanmar marine dealer or
distributor.
-
Compression leakage from
intake / exhaust valve.
See your authorized
Yanmar marine dealer or
distributor.
-
• Starter does not turn or
turns slowly (engine
can be turned
manually)
Faulty clutch position. Shift to NEUTRAL and
start.
-
Insufficient battery charge. Check fluid level.
Recharge. Replace.
See Checking
the Battery
Electrolyte Level
(Serviceable
Batteries Only)
on page 62
Cable terminal contact failure. Remove corrosion from
terminals. Tighten
battery cables.
-
Faulty safety switch device. See your authorized
Yanmar marine dealer or
distributor.
-
Faulty starter switch. See your authorized
Yanmar marine dealer or
distributor.
-
Power lacking due to accessory
drive being engaged.
See your authorized
Yanmar marine dealer or
distributor.
-
• Engine cannot be
turned manually
Internal parts seized. See your authorized
Yanmar marine dealer or
distributor.
-
TROUBLESHOOTING
6LPA Series Operation Manual 75
© 2007 Yanmar Marine International
Comentários a estes Manuais