Yanmar 1GM10V Especificações descarregar pdf (Página 35)

4. Maintenance & Inspection

35

4.4.2 Conditions to Insure Compliance

with Emission Standards

This product is an EPA & ARB approved

engine. The following are the conditions

that must be met in order to insure that

the emission during operation meets the

EPA standards. Be sure to follow these.

• The surrounding conditions should

be as follows:

a) Ambient temperature: -20 ∼ 40 °C

b) Relative humidity: 80% or lower

c) Permissable value for intake negative

pressure: 0.5kPa (50mmAq) or lower

d) Permissable value for exhaust back

pressure: 6.9kPa (700mmAq) or lower

• The fuel and lube oil used should be

as follows:

a) Fuel: The diesel gas oil ISO 8217

DMA, BS 2869 A1 or A2 (Cetane No.

45 minimally.)

b) Lube oil: Type API, class CD

• Do not remove the seals limiting the

amount of fuel injected and the

speed.

• Be sure to carry out inspections.

Follow the basic guidelines outlined in

4.3 (Periodic Inspection Items) of this

manual and keep a record of the

results. Pay particular attention to

these important points: replacing the

lube oil, lube oil filter, the fuel filter and

cleaning the intake silencer element.

Note: Inspections are divided into two

sections in accordance with whom is in

charge of carrying out the inspection: (the

User) and (the Maker).

• Warranty period for emission parts

If the schedule of periodic maintenance

outlined in 4.4.3 (Inspection and

Maintenance) is followed, the warranty

period is determined by the age of the

engine or the number of hours of

operation as indicated below:

Name of parts

Warranty period

(hours of operation/age, whichever

occurs first)

< 19kW

Fuel injection pump assembly

1500 / 2

Fuel injection valve assembly

GM OPERATION.book 35 ページ２００４年１０月４日　月曜日　午前１１時１１分

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Comentários a estes Manuais

Sem comentários