Yanmar 6LPA-STZP2 Especificações descarregar pdf (Página 27)

PRODUCT OVERVIEW

6LPA Series Operation Manual 21

12/05

Key (Starter) Switch

Figure 6

Figure 7

The GLOW position (Figure 7, (1)) is the

start aid position. Electric current to the air

heater (if equipped) is turned on.

The START position (Figure 7, (4)) allows

current to the starting motor. When starting

the engine, move the key to the START

position and release. The key will

automatically move to the ON position.

NOTICE

NEVER hold the key in the START position

for longer than 15 seconds or the starter

motor will overheat.

When the key is in the OFF position

(Figure 7, (2)) the electric current is off.

The key can be inserted or removed in this

position.

The ON position (Figure 7, (3)) allows

electrical current to the controls and

equipment and allows the engine to keep

running. To stop the engine, keep the key

switch in the ON position and push the

engine stop button. After stopping the

engine, turn key to OFF position.

Engine Stop Button

Figure 7

Figure 8

Push and hold the stop button

(Figure 8, (1)) on the instrument panel to

stop the engine. When the stop button is

pushed, the solenoid valve on the fuel

injection pumps stops the fuel supply to

the engine.

Press and hold the engine stop button until

the engine has come to a complete stop.

NOTICE

Releasing the engine stop button before

the engine has stopped rotating will cause

the engine to continue to run.

Remote Control (Throttle) Handle

The engine is controlled by the remote

control handle located in the cockpit. The

speed control lever on the engine and

clutch lever on the marine drive are

connected by remote control cables. There

are various models of remote control

handles available. When using a model

other than shown below, consult the

manufacturer's documentation for more

information.

0003622

(1)

(2)

(3)

(4)

(1)

0004881

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 105 106

Comentários a estes Manuais

Sem comentários