Yanmar 6LPA-STZP2 Especificações descarregar pdf (Página 53)

ENGINE OPERATION

6LPA Series Operation Manual 47

12/05

5. Remove the key and cover the key switch

with the moisture cap.

NOTICE

Continue to hold the stop button in until the

engine is completely stopped. If the button

is released before the engine has

completely stopped, it may restart. If the

engine does not shut off when the engine

stop button is pushed, close the fuel cock

on the fuel tank..

6. Turn off the battery switch (if equipped).

7. Close the fuel cock.

8. Close the seacock (if equipped).

NOTICE

• Be sure to close the seacock. Neglecting

to close the seacock could allow water to

leak into the boat and may cause it to

sink.

• If seawater is left inside the engine, it

may freeze and damage parts of the

cooling system when the ambient

temperature is below 0°C (32°F).

CHECKING THE ENGINE

AFTER OPERATION

• Check that the power switch is off and

that the battery switch (if equipped) is

turned to off.

• Fill the fuel tank. See Filling the fuel tank:

on page 29.

• Close seawater cock(s).

• If there is a risk of freezing, check that

the cooling system contains enough

coolant. See Engine Oil Specifications

on page 30.

• If there is a risk of freezing, drain the

seawater system. See Drain Seawater

Cooling System on page 74.

• At temperatures below 0°C (32°F), drain

seawater system and connect the engine

heater (if equipped).

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 105 106

Comentários a estes Manuais

Sem comentários