Yanmar 6LPA-STZP2 Especificações descarregar pdf (Página 58)

PERIODIC MAINTENANCE

52 6LPA Series Operation Manual

Tightening Fasteners

Use the correct amount of torque when you tighten fasteners on the engine. Applying

excessive torque may damage the fastener or component and not enough torque may

cause a leak or component failure.

NOTICE

he tightening torque in the Standard Torque Chart should be applied only to the

bolts with a “7” head (JIS strength classification: 7T). Apply 60% torque to bolts

that are not listed. Apply 80% torque when tightened to aluminum alloy.

When lock adhesive is applied, decide separately.

Bolt Diameter x

Pitch (mm)

M6x1.0 M8x1.25 M10x1.5 M12x1.75 M14x1.5 M16x1.5

Tightening

Torque

N·m 11 ± 1.0 25 ± 3 49 ± 5 88 ± 10 140 ± 10 230 ± 10

ft-lb 8.0 ± 0.7 18.8 ± 2.2 36.2 ± 3.7 65.1 ± 7.4 103 ± 7.2 170 ± 7.2

Taper Plugs 1/8 1/4 3/8 1/2

Tightening

Torque

N·m10202959

ft-lb 7.4 14.5 21.7 43.2

Pipe Joint Bolts M8 M10 M12 M14 M16

Tightening

Torque

N·m 15 ± 2 23 ± 3 29 ± 5 44 ± 5 54 ± 5

ft-lb 10.9 ± 1.5 16.6 ± 2.2 21.7 ± 3.7 32.6 ± 3.7 69.8 ± 3.7

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 105 106

Sem comentários

Yanmar 6LPA-STZP2 Especificações Página 58