Yanmar 6LPA-STP2 Especificações descarregar pdf (Página 19)

100

101

(2) Alarm Devices

When there is some problem during operation, the alarm buzzers and lamps will come on.

●Alarm buzzer

When the various alarm lamps come on, the alarm buzzer will come on at the same time and

sound. However, no alarm buzzer will sound when the charge lamp comes on.

●Buzzer stop switch

When the buzzer sound is no longer necessary, it can be turned off with the STOP switch on the

right.

●Alarm lamps

The alarm monitor window indicates the trou-

ble spot when one of the symbols shown

below lights up. When operation is normal

the alarm lights are off; however, should

some problem arise, the sensors will pick it

up and cause the light behind the appropri-

ate symbol to come on.

①BATTERY CHARGE

When the charge is abnormal,

the lamp will come on. When charging begins the lamp will go off. (A buzzer will

not sound when the lamp comes on.)

②C.WATER TEMP

When the temperature of the cooling fresh water exceeds the maximum (95℃ or

higher), the lamp will light. Continuing operation at temperatures exceeding the

maximum will result in engine damage and seizure. Check the load and the fresh

water cooling system for any abnormalities.

③LUB. OIL PRESS. (Engine)

When the lube oil pressure falls below specified the oil pressure sensor will register

this and the lamp will come on. Continuing operation with insufficient oil will result

in engine damage and seizure. Check the oil level and lub.oil system.

④C.WATER LEVEL

When the amount of cooling water in the fresh water tank falls below normal, the

sensor will register this and cause the lamp to come on. Continuing operation with

insufficient cooling water will result in engine damage and seizure. Check the cool-

ing water level in the fresh water tank and cooling system.

⑤GEAR OIL

When the amount of gear oil falls below specified the sensor will register this and

cause the lamp to come on.

Continuing operation with insufficient oil in the gear device will result in damage

and seizure. Check the amount of gear oil.

⑥BOOST

When there is an abnormal rise in the boost (turbocharger's boost pressure), the

sensor will cause the lamp to come on. When load is excessive, it may result in

damage to moving parts of the engine or seizure.

Alarm monitor window (for C/D type)

BATTERY

CHARGE

C.WATER

TEMP

LUB. OIL

PRESS.

C.WATER

LEVEL

GEAR

OIL

BOOST

OPTION

6LPA-STZP6LPA-DTZP

BATTERY

CHARGE

C.WATER

TEMP

LUB.OIL

PRESS.

C.WATER

LEVEL

GEAR

OIL

EXHAUST

FUEL

FILTER

BOOST

DIESEL

PREHEAT

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 698 699

Comentários a estes Manuais

Sem comentários

Yanmar 6LPA-STP2 Especificações Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Motor Yanmar 6LPA-STP2