Yanmar 6LPA-STP2 Especificações descarregar pdf (Página 37)

4.7 Stopping the Engine

_

31

_

Stopping the engine suddenly after

operating at high speed without cool-

ing it down will cause the engine tem-

perature to rise quickly resulting in

deterioration of the lube oil and stick-

ing of parts.

Stop the engine in accordance with the following

procedures.

①Stop the boat.

Put the remote control handle in NEUTRAL to

stop the boat.

②Be sure to race the engine before stopping it.

→See 4.6 (7)

③Cool down the engine at low speed (1000rpm

or lower) for about 5 minutes.

④Continue to push the stop button until the

engine is completely stopped. If you release

the button before the engine has completely

stopped, it may restart.

⑤Turn the starter switch to OFF, remove the key

and place it in a safe place.

⑥Turn off the battery switch.

⑦Close the fuel tank cock.

⑧Close the kingston cock.

In the rare instance where the engine does not

stop when the stop button is pushed, stop the

engine by closing the fuel cock on the fuel tank.

Neglecting to close the kingston cock

will allow water to leak into the boat

and may cause it to sink. Be sure to

close the cock.

[NOTICE]

[NOTICE]

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 698 699

Comentários a estes Manuais

Sem comentários