Yanmar 6LPA-STP2 Especificações descarregar pdf (Página 20)

100

101

Function of Alarm Devices

Alarm Buzzer On Off

Alarm Lamps

Charge Lamp On Off

Cooling Water Temperature Off Off

Engine Oil Pressure On Off

Cooling Fresh Water Level Off Off

Boost Pressure Off Off

Oil/Water Separator Level Off Off

No Cooling Seawater On Off

Gear Oil Level Off Off

⑦FUEL FILTER

When the drain inside the water separator in the fuel filter becomes excessive, the

sensor will cause the lamp to come on. Clean out the drain in the water separator.

If operation is continued without cleaning, it will become impossible to feed fuel to

the engine and damage or seizure of the fuel injection pump will result.

⑧EXHAUST

When the amount of cooling seawater being discharged becomes too small, the sen-

sor will activate the lamp. Continuing operation under this condition will result in dam-

age of the engine and seizure. Check for clogging in the seawater cooling system and

damaged parts.

FUEL

FLTER

EXHAUST

(3) Functions of Warning Devices

When the key switch is turned on, the alarm devices functions as follows

1) Turning the key to ON:

① Warning buzzer sounds

② The BATTERY CHARGE, EXHAUST (seawater flow) and LUB. OIL PRESS. come on. The

C.WATER TEMP, FUEL FILTER, GEAR OIL, C.WATER LEVEL and BOOST lapms do not

come on.

(Note) When the warning buzzer and lamps function as above, everything is normal.

2) When the key switch is turned to START to start the engine and then returned to ON after

the engine starting up.

① The warning buzzer stops sounding.

② All warning lamps go off. After the engine starts up, make it the rule to check alarm

devices. If they do not work normally, contact your dealer.

Before starting

OFF

→ON

After Starting

START

→ON

Key Operation

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 698 699

Comentários a estes Manuais

Sem comentários

Yanmar 6LPA-STP2 Especificações Página 20

Comentários a estes Manuais

Manuais e produtos relacionados com Motor Yanmar 6LPA-STP2